Brand New Clutch Drum Bell Housing Reduction Gear Box Fit 43cc/49cc Mini PIT Dirt Pocket Bike Mini Quad ATV Pocket Rocket T8F CHAIN

Backward spin gear box

RATIO     5:1
TOOTH     17 T
CHAIN SIZE     T8F CHAIN
DISTANCE BETWEEN MOUNT HOLES(centre hole to centre hole)     around 70mm

Brand New 49cc pull start+carby+clutch for 49cc quad or dirt bike/scooter. 

You will receive 1x easy pull start, 1xclutch, 1xcarby.

Travel distance: around 120mm.

This model is designed for flat ground use, and when used in hilly or uneven terrain the clutch can wear out much faster than expected.

NEW FORZA 1 / K1 163cc Kids Buggy – Automatic Go Kart

163cc | 5.5HP | Automatic CVT | Reverse Gear | Electric & Pull Start

200cc 200X Challenger UTV new model

10 Inch 2.5-10tube for dirt bike

#T8F 110links chain will fit most dirt bike/quad/atv/buggy. length: around 44cm.

The size of this tyre+tube is 3.00-10 (80/100-10). Off road tread, you will receive 1xtyre and 1 tube.

2 x F7TC Spark Plugs will fit most GX110/120/140/160/200/270 OR 2.5HP/5.5HP/6.5HP/7.5HP/9HP LIFAN HONDA ENGINES.

You will receive 2 spark plugs.

2 xNGK D8TC Spark Plugs will fit most 200/250cc chinese bike/quad/buggy/atv/trike. More sparking and easy to start engine.

You will receive 2 spark plugs.

2 x A7TC Spark Plugs will fit most 50-160cc chinese bike/quad/buggy/atv/trike.

You will receive 2 spark plugs.

• Mount hole distance (eye - eye): 250mm

• Overall dimensions:  850mm x 440mm x 350mm

• Stub axle thickness: 15mm

• Suspension (eye - eye): 280mm

• • Brake caliper mount hole distance: 50mm

It will fit our 9hp go kart.

Brand New 48T Teeth Rear Sprocket Cog Fit 428 Chain PIT TRAIL DIRT BIKE MOTORCROSS

41T Teeth 428 Chain Rear Back Sprocket Cog PIT TRAIL DIRT BIKE ATV KART BUGGY

This shock comes with a spring of 6mm thickness, and a mounting hole of 10mm.

Length: center to center 285mm.

It is used on our 9hp kart as a front shock.

You will receive 1x shock for this listing.

This oil dipstick will fit our 6.5hp/9hp karts/drift trikes/buggies. It comes with a rubber sealing ring

Brand New Oil Lever Dip Stick Dipstick for PIT Quad Dirt Bike ATV Dune Buggy

This shock comes with a spring of 8mm thickness, and a mounting hole of 10mm.

Length: center to center 310mm.

It is used on our 125cc 3+1 quad as a front shock.

You will receive 1x shock for this listing.

Brand New Gearbox

This set is used on our 9hp go-kart/drift trike.

These replacement clutch boxes come as complete units and are ready to be fitted to your engine.

Fits the Honda GX240 - GX390 range and most Chinese 9hp to 13hp clone engines with 25mm diameter and 60mm long output shafts, also known as the L-type PTO shaft option.

Requires a 60mm long, 25mm diameter crankshaft input, output is to a 22mm shaft, also known as the R-type PTO shaft.

Ready to assemble, they give incredible torque at lower engine speeds and are ideal replacements on go-karts, mixers, pumps, etc.

DETAILS:

• Type: 2:1 Reduction
• Input Shaft: 25mm Diameter, 60mm Long
• Input Shaft Keyway: 7mm
• Input Mounting Holes: 90mm Square

• Output Shaft: 22mm Diameter, 50mm Long
• Output Shaft Keyway: 7mm
• Output Mounting Holes: 70mm Square

Please Note: The gearbox is supplied without oil, and requires oil before use. This is typically the same as you would use in the engine sump i.e an SAE30 4-stroke small engine oil.

49cc go kart Front Stub Axle Strut Rod Knuckle Support Left/Right

Brand New 110cc engine SEMI with e/start and kick start, the starter motor is on the top.

 It will fit most Chinese 110cc dirt bikes/quads /buggies/karts

 Engine Size       107CC
 Gear System       4 gears, Semi-auto, 1-N-2-3-4 CIRCLE
 Type                     Horizontal, single-cylinder, 4-stroke, air-cooled
 Start Method        Electrical Start and Kick Start
 Bore x Stroke         52.5mm x 49.5mm
 Compression ratio      9.0:1
 Front sprocket      #420

We have all the accessories for this engine in stock, like the wiring harness, carby, air filter,  electrical parts(CDI unit, coil, kill switch), exhaust pipe & muffler. Please view our listings or contact us for more details.

BRAND NEW

SPROCKET DISC CARRIER HUB 20MM AXLE. It fits on our 80cc ESKY.

Fit Most project, Go Kart, HuFFy Slider, Drift Trike.

BRAND NEW

25mm Axle Assembly  Length 845mm

It fits our mini Willy Jeep with a back engine.

Fit Most

JEEP, Project, Go Kart, HuFFy Slider, Drift Trike.

This listing is for 1x shock.

This Shock fits on our mini Willy Jeep as the front shock.

Eye to Eye center: 290mm

Bolt hole: 10mm

Spring diameter:8mm

This listing is for 1x shock.

This Shock fits on our mini Willy Jeep as the rear shock.

Eye to Eye center: 270mm

Bolt hole: 10mm

Spring diameter:8mm