- Mount hole distance (eye - eye): 250mm
- Overall dimensions: 850mm x 440mm x 350mm
- Stub axle thickness: 15mm
- Suspension (eye - eye): 280mm
- Brake caliper mount hole distance: 50mm
It will fit our 9hp go kart.
This kit include those items:
- 26 x 4.0 Front Wheel including tyre tube and aluminium rim
- Steel fork
- A kill switch
- Front Brake and Disc
- Bearing headset
- Handle bar to suit
- Forks/handlebar connecting Stem
- Hand Grips
- Hand Accelerator Set
Brand New 110cc engine SEMI with e/start and kick start, the starter motor is on the top.
It will fit most Chinese 110cc dirt bikes/quads /buggies/karts
Engine Size 107CC
Gear System 4 gears, Semi-auto, 1-N-2-3-4 CIRCLE
Type Horizontal, single-cylinder, 4-stroke, air-cooled
Start Method Electrical Start and Kick Start
Bore x Stroke 52.5mm x 49.5mm
Compression ratio 9.0:1
Front sprocket #420
We have all the accessories for this engine in stock, like the wiring harness, carby, air filter, electrical parts(CDI unit, coil, kill switch), exhaust pipe & muffler. Please view our listings or contact us for more details.
Product Description
This is a brand new Clutch Assembly to fit our 300cc buggy/utv
Please also check with the old part on your bike to make sure it is the correct one.
10 inch wheel , 22x10-10 . 4 stud/holes.Alloy Rim.
The diameter of the central hole is 75mm.
The distance of the opposite holes is 135mm
It fit our FORZA 5/7 buggy as a rear wheel.
It comes with:
1x axle 87cm length ø27
1xsprocket #428 37 teeth
1xdisc 3mm thickness
1xdisc hub with 23 splines
1xsprocket hub with 23 splines
2xbearing holders housing 25mm.
2xwheel hubs 25mm
bolts and nuts ,spacers.
Brand New Gearbox
This set is used on our 9hp go-kart/drift trike.
These replacement clutch boxes come as complete units and are ready to be fitted to your engine.
Fits the Honda GX240 - GX390 range and most Chinese 9hp to 13hp clone engines with 25mm diameter and 60mm long output shafts, also known as the L-type PTO shaft option.
Requires a 60mm long, 25mm diameter crankshaft input, output is to a 22mm shaft, also known as the R-type PTO shaft.
Ready to assemble, they give incredible torque at lower engine speeds and are ideal replacements on go-karts, mixers, pumps, etc.
This is a carefully selected replacement part of the highest quality, and also at an affordable price too.
DETAILS:
• Type: 2:1 Reduction
• Input Shaft: 25mm Diameter, 60mm Long
• Input Shaft Keyway: 7mm
• Input Mounting Holes: 90mm Square
• Output Shaft: 22mm Diameter, 50mm Long
• Output Shaft Keyway: 7mm
• Output Mounting Holes: 70mm Square
Please Note: The gearbox is supplied without oil, and requires oil before use. This is typically the same as you would use in the engine sump i.e an SAE30 4-stroke small engine oil.
This artificial leather seat will fit on most Chinese twin/single seat buggy 50/70/90/110/125/150/250cc and go-kart/trike for kids/teens.
You will receive one seat, thanks
10 inch wheel , 21x7-10 . 4 stud/holes.Alloy Rim.
The diameter of the central hole is 75mm.
The distance of the opposite holes is 110mm
It fit our FORZA 5/7 buggy as a front wheel.
Complete Rear Axle Set 27mm 25mm Hubs Disc Sprocket420 Drift Trike Project 86cm
Axle length : 860mm.
It comes with:
1x27mm axle
2x25mm 3 stud hubs(fit go kart wheels)
1xsprocket #420 41 teeth.
1xdisc hub with keyway
1xdisc 3mm thickness
2xbearing holders housing 25mm.
bolts and nuts.
This artificial leather seat will fit on most Chinese twin/single seat buggies 50/70/90/110/125/150/250cc/300cc and go-kart/trike, adult size
You will receive one BLACK seat, thanks
10 inch wheel , 22x10-10 . 4 stud/holes.
The diameter of the central hole is 110mm.
The distance of the opposite holes is 135mm
It fit our FORZA 5/7 buggy as a rear wheel.
10 inch wheel , 21x7-10 . 4 stud/holes.Steel Rim.
The diameter of the central hole is 75mm.
The distance of the opposite holes is 110mm
It fit our FORZA 5/7 buggy as a front wheel.