This oil dipstick will fit our 6.5hp/9hp karts/drift trikes/buggies. It comes with a rubber sealing ring
Brand New Oil Lever Dip Stick Dipstick for PIT Quad Dirt Bike ATV Dune Buggy
The total length is around 85mm DIAMETER OF THREAD around 19mm |
This shock comes with a spring of 8mm thickness, and a mounting hole of 10mm.
Length: center to center 310mm.
It is used on our 125cc 3+1 quad as a front shock.
You will receive 1x shock for this listing.
Brand New Gearbox
This set is used on our 9hp go-kart/drift trike.
These replacement clutch boxes come as complete units and are ready to be fitted to your engine.
Fits the Honda GX240 - GX390 range and most Chinese 9hp to 13hp clone engines with 25mm diameter and 60mm long output shafts, also known as the L-type PTO shaft option.
Requires a 60mm long, 25mm diameter crankshaft input, output is to a 22mm shaft, also known as the R-type PTO shaft.
Ready to assemble, they give incredible torque at lower engine speeds and are ideal replacements on go-karts, mixers, pumps, etc.
This is a carefully selected replacement part of the highest quality, and also at an affordable price too.
DETAILS:
• Type: 2:1 Reduction
• Input Shaft: 25mm Diameter, 60mm Long
• Input Shaft Keyway: 7mm
• Input Mounting Holes: 90mm Square
• Output Shaft: 22mm Diameter, 50mm Long
• Output Shaft Keyway: 7mm
• Output Mounting Holes: 70mm Square
Please Note: The gearbox is supplied without oil, and requires oil before use. This is typically the same as you would use in the engine sump i.e an SAE30 4-stroke small engine oil.
Brand New starter motor with the starter solenoid/relay
-
For Honda GX240 and GX270 8HP and 9Hp series Stationary Engines and Chinese Copy Stationary Engines.
- 12 volt
- 14 teeth Gear
49cc go kart Front Stub Axle Strut Rod Knuckle Support Left/Right
You will receive one strut axle, please choose left side or right side.
Brand New 110cc engine SEMI with e/start and kick start, the starter motor is on the top.
It will fit most Chinese 110cc dirt bikes/quads /buggies/karts
Engine Size 107CC
Gear System 4 gears, Semi-auto, 1-N-2-3-4 CIRCLE
Type Horizontal, single-cylinder, 4-stroke, air-cooled
Start Method Electrical Start and Kick Start
Bore x Stroke 52.5mm x 49.5mm
Compression ratio 9.0:1
Front sprocket #420
We have all the accessories for this engine in stock, like the wiring harness, carby, air filter, electrical parts(CDI unit, coil, kill switch), exhaust pipe & muffler. Please view our listings or contact us for more details.
BRAND NEW
SPROCKET DISC CARRIER HUB 20MM AXLE. It fits on our 80cc ESKY.
Fit Most project, Go Kart, HuFFy Slider, Drift Trike.
BRAND NEW
25mm Axle Assembly Length 845mm
It fits our mini Willy Jeep with a back engine.
Fit Most
JEEP, Project, Go Kart, HuFFy Slider, Drift Trike.
This listing is for 1x shock.
This Shock fits on our mini Willy Jeep as the front shock.
Eye to Eye center: 290mm
Bolt hole: 10mm
Spring diameter:8mm
This listing is for 1x shock.
This Shock fits on our mini Willy Jeep as the rear shock.
Eye to Eye center: 270mm
Bolt hole: 10mm
Spring diameter:8mm
#T8F 86 links chain will fit most dirt bike/quad/atv/buggy. length: around 345mm.
Brand New Recoil Pull Starter Fit 43cc/49cc Mini PIT Dirt Pocket Bike Mini Quad ATV Pocket Rocket. 4 Bolts Fixed.
It will fit our 49cc karts
GO KART WHEEL BRAND NEW IN BLACK
Size: 10x4.50-5
3 STUD RIM&TYRE, WILL FIT MOST GO KART/HUFFY SLIDER/DRIFT TRIKE/BUGGY/PROJECT.
Distance from bolt hole to next bolt hole: 50mm
Diameter of central hole for axle: 40mm
GO KART WHEEL BRAND NEW IN BLACK
Size: 11x7.10-5
3 STUD RIM&TYRE, WILL FIT MOST GO KART/HUFFY SLIDER/DRIFT TRIKE/BUGGY/PROJECT.
Distance from bolt hole to next bolt hole: 50mm
Diameter of central hole for axle: 40mm
13mm Carb Carby Carburetor Air Filter 43cc 49cc Mini Dirt Pocket Quad Bike ATV
Specification Of Carby
Diameter Of Intake Around 13mm
Distance Between Mount Holes(center Hole To Centre Hole) Around 38mm
Specification Of Air Filter
Inner Diameter Of Air Filter Connector Around 42mm
Length Of The Air Filter Around 50mm
Distance Between Adaptor Mounting Holes (center To Centre) Around 40mm
Features:
1. Easy to install, practical, easy to open cleaning filter net;
2. Made of aluminum alloy connector and glass housing; you can see filter inner clearly;
3. Thread design, you can dismount it repeatedly to clean and wash;
4. Aluminum alloy CNC connector, it has been polished and chrome plated;
Specifications:
Product name: 6mm CNC Universal Gas Fuel Oil Filter for Motocross ATV
Material: aluminum alloy+ glass
Color: Black/golden/green
Product size: 95 X 28 X 28mm/3.74 X 1.10 X 1.10"
Gross weight: about 50g
Nozzle size:6mm/0.31"
Applicable vehicle: motorcycle, car, ATV
1 X Gas Fuel Oil Filter
BIGFOOT 125CC PIT MOTOR DIRT BIKE TRAIL MOTOCROSS TERRAIN PRO KICK START BLUE
Features:
Big wheel 14/17 inches. USD forks Heavy duty rear shock absorb. Chrome performance exhaust. Knobby tires Hydraulic disc brakes. the latest model. Dress-up parts. Colors:Black,red,blue.
BIGFOOT 125CC PIT MOTOR DIRT BIKE TRAIL MOTOCROSS TERRAIN PRO KICK START GREEN
Features:
Big wheel 14/17 inches. USD forks Heavy duty rear shock absorb. Chrome performance exhaust. Knobby tires Hydraulic disc brakes. the latest model. Dress-up parts.
BRAND NEW HANGER
These are the weld-in bearing hangers to suit high-quality Drift trike constructions that allow you to use hung bearings for your new drift trike project. We suggest using these with 40mm axles so you have plenty of options to replace parts if and when you need to.
This listing is for 1x hanger
We have other parts (40mm axle sets, frames) to fit this part on. Please visit our shop.
Fit Most
The project, Go Kart, HuFFy Slider, Drift Trike.
Feature:
- E-starter and pull-starter
- TAV30 Series Torque converter
- Rear vision mirrors
- Front and rear hydraulic brakes
- Horn
- Chain guard
- Headlight(high and low beams)
- Tail light
- Suspensions
- Heavy duty #530 chain
Feature:
- E-starter and pull-starter
- TAV30 Series Torque converter
- Rear vision mirrors
- Front and rear hydraulic brakes
- Horn
- Chain guard
- Headlight(high and low beams)
- Tail light
- Suspensions
- Heavy duty #530 chain
Feature:
- E-starter and pull-starter
- TAV30 Series Torque converter
- Rear vision mirrors
- Front and rear hydraulic brakes
- Horn
- Chain guard
- Headlight(high and low beams)
- Tail light
- Suspensions
- Heavy duty #530 chain
Silver 700mm 22mm Steel Handle Bar 70cc 110cc 125cc PIT PRO Quad Dirt Bike ATV
Brand New Steel Handle Bars For PIT PRO PIT Bike Trail Bike Dirt Bike Thumpstar
LEIGHT OF HANDLEBAR | approx 700mm |
DIAMETER OF HANDLEBAR | approx 22mm |
Thickness: 2mm |
Size:
Intake Diameter:15mm
Distance between mount holes (centre to centre ): 31mm
Fitment:
This wheel as a front wheel fits our kid's buggy FORZA1/K1
Size: 6 inch
Model: 145/70-6
Axle hole: 15mm
This wheel as a rear wheel fits our kid's buggy FORZA1/K1
Size: 8 inch
Model: 16x6-8
Axle hole: 20mm
Suspension arm----1 Lower arm please select left or right side arm.
You will receive 1 arm.
Front Stub Axle Strut Rod Knuckle Support KIDS Buggy Go Kart ATV Qaud Left Right K 1 /FORZA 1
Front Stub Axle Strut Rod Knuckle Support Left/Right will fit buggy/go kart/quad/atv/project.
You will receive one strut axle, please select a left side or right side.
Upper Arm FORZA 1 K1 Dune Buggy 163CC 5.5HP Off Road UTV ATV 2 Seater 4 Wheel
You will receive 1 upper arm.
This is a brand new complete LIFAN 270cc, 4 stroke, restrictable, automatic, air-cooled, pull start and e-start engine with a reduction gearbox.
Standard equipment on 270cc 9hp Drift trike/kart.
These engines are ultra-reliable and can be used on power washers, go-karts, log splitters, chippers, spreaders, mowers, and a whole range of projects and bespoke fitment.
ENGINE TYPE - Single cylinder 4 Stroke Unleaded Air Cooled Engine
ENGINE DISPLACEMENT - 270ml
MAXIMUM POWER OUTPUT - 9hp @ 3600rpm
MAXIMUM TORQUE OUTPUT - 19.0 N.m @ 2500rpm
STARTING SYSTEM - PULL RECOIL START and Electrical START
BORE x STROKE SIZE - 77mm x 58mm
FUEL TANK CAPACITY - 6 litres
FUEL CONSUMPTION - 290g / HP - hour
ENGINE OIL CAPACITY - 1.1 Litres
ENGINE OIL GRADE - SAE-30 Grade
OUTPUT SHAFT OUTSIDE DIAMETER - 22mm
SHAFT ROTATION: ANTI-CLOCKWISE (VIEW FROM SHAFT SIDE)
DIMENSION (LxWxH) 380x420X410mm
NET WEIGHT 30KGS
Brand New 300cc water-cooled engine. It will fit most Chinese dune buggies /utv/quads, built-in reverse gear.
The output shaft is ø25, 6 splines.
It is used on our 300cc buggies and UTVs.
Engine type: 173MN, 4-STROKE,SINGLE CYLINDER,WATER COOLED
Displacement: 275.6 CC
Output Max.:13KW@7500 RPM
Max torque : 22N.m@5000 RPM
Bore x stroke: 2.85 x 2.63 INCHES (72.5x66.8MM)
Ignition: C.D.I
Starting system: ELECTRIC START
Engine oil: SAE 10W/40
Gears: D-N-R
Clutch: AUTOMATIC CTV
The size of this tube is 3.00-10 (80/100-10). Off-road tread, you will receive 1 tube.
BRAND NEW
3X 6MM upgraded fuel filters
Fit PIT PRO Trail Dirt Bike QUAD ATV Gokart Buggy
You will receive 3 fuel filters.