100% High quality aftermarket Complete Gasket Set for 250cc 4-stroke water-cooled CF/CH 250 172mm engine, CFmoto , Honda, Boreem (BMS), Kazuma, JMstar , other 250cc 172mm 4-stroke.
Fit most 250cc water-cooled buggies ,Kinroad Sahara,Kandi. Twister/Hammer.
Brand New 49cc pull start+carby+clutch for 49cc quad or dirt bike/scooter.
You will receive 1xpull start(please check it is the same one as yours. the teeth are alloy. ), 1xclutch, 1xcarby.
This set piston an drings will fit most chinese 110cc/125cc 4 stroke engine.
This case will fit most chinese 4 stroke 110/125cc engines, for quads/dirt bike/atv/buggy.
RECOIL PULL STARTER ASSEMBLY FOR HONDA GX160-200 5.5HP 6.5HP ENGINES, FIT ON GO KARTS/DRIFT TRIKES
BOLT STRAIGHT ON.
Replacement Part.
Dimensions : 175x175x40mm
Suits GX110, GX140, GX160, GX200
Brand New 49cc pull start 49cc quad or dirt bike/scooter.
You will receive 1xpull start.
7/8" 22.2MM 13 Tooth #428 Chain SPROCKET Go Kart/buggy/drift trike GX240/270 8HP 9HP , 8MM KEYWAY.
Engine Head Gasket Kit FIT 8HP 9HP GX240 GX270 HONDA COPY ENGINE GO KART DRIFT TRIKE.
Product Description
This is a brand new Clutch Assembly to fit our 300cc buggy/utv
Please also check with the old part on your bike to make sure it is the correct one.
Brand New 49cc pull start+carby+clutch for 49cc quad or dirt bike/scooter.
You will receive 1x easy pull start, 1xclutch, 1xcarby.
This oil dipstick will fit our 6.5hp/9hp karts/drift trikes/buggies. It comes with a rubber sealing ring
Brand New Oil Lever Dip Stick Dipstick for PIT Quad Dirt Bike ATV Dune Buggy
The total length is around 85mm DIAMETER OF THREAD around 19mm |
Brand New Gearbox
This set is used on our 9hp go-kart/drift trike.
These replacement clutch boxes come as complete units and are ready to be fitted to your engine.
Fits the Honda GX240 - GX390 range and most Chinese 9hp to 13hp clone engines with 25mm diameter and 60mm long output shafts, also known as the L-type PTO shaft option.
Requires a 60mm long, 25mm diameter crankshaft input, output is to a 22mm shaft, also known as the R-type PTO shaft.
Ready to assemble, they give incredible torque at lower engine speeds and are ideal replacements on go-karts, mixers, pumps, etc.
This is a carefully selected replacement part of the highest quality, and also at an affordable price too.
DETAILS:
• Type: 2:1 Reduction
• Input Shaft: 25mm Diameter, 60mm Long
• Input Shaft Keyway: 7mm
• Input Mounting Holes: 90mm Square
• Output Shaft: 22mm Diameter, 50mm Long
• Output Shaft Keyway: 7mm
• Output Mounting Holes: 70mm Square
Please Note: The gearbox is supplied without oil, and requires oil before use. This is typically the same as you would use in the engine sump i.e an SAE30 4-stroke small engine oil.
Brand New starter motor with the starter solenoid/relay
-
For Honda GX240 and GX270 8HP and 9Hp series Stationary Engines and Chinese Copy Stationary Engines.
- 12 volt
- 14 teeth Gear
Brand New 110cc engine SEMI with e/start and kick start, the starter motor is on the top.
It will fit most Chinese 110cc dirt bikes/quads /buggies/karts
Engine Size 107CC
Gear System 4 gears, Semi-auto, 1-N-2-3-4 CIRCLE
Type Horizontal, single-cylinder, 4-stroke, air-cooled
Start Method Electrical Start and Kick Start
Bore x Stroke 52.5mm x 49.5mm
Compression ratio 9.0:1
Front sprocket #420
We have all the accessories for this engine in stock, like the wiring harness, carby, air filter, electrical parts(CDI unit, coil, kill switch), exhaust pipe & muffler. Please view our listings or contact us for more details.
Brand New Recoil Pull Starter Fit 43cc/49cc Mini PIT Dirt Pocket Bike Mini Quad ATV Pocket Rocket. 4 Bolts Fixed.
It will fit our 49cc karts