10 Inch 2.5-10tube for dirt bike

BRAND NEW

25mm Axle Assembly  Length 870mm

Fit Most
Project, Go Kart,HuFFy Slider ,Drift Trike.

Brand New Gearbox

This set is used on our 9hp go-kart/drift trike.

These replacement clutch boxes come as complete units and are ready to be fitted to your engine.

Fits the Honda GX240 - GX390 range and most Chinese 9hp to 13hp clone engines with 25mm diameter and 60mm long output shafts, also known as the L-type PTO shaft option.

Requires a 60mm long, 25mm diameter crankshaft input, output is to a 22mm shaft, also known as the R-type PTO shaft.

Ready to assemble, they give incredible torque at lower engine speeds and are ideal replacements on go-karts, mixers, pumps, etc.

This is a carefully selected replacement part of the highest quality, and also at an affordable price too.

DETAILS:

• Type: 2:1 Reduction
• Input Shaft: 25mm Diameter, 60mm Long
• Input Shaft Keyway: 7mm
• Input Mounting Holes: 90mm Square

• Output Shaft: 22mm Diameter, 50mm Long
• Output Shaft Keyway: 7mm
• Output Mounting Holes: 70mm Square

Please Note: The gearbox is supplied without oil, and requires oil before use. This is typically the same as you would use in the engine sump i.e an SAE30 4-stroke small engine oil.

This axle will fit our 125cc Sahara and Sahara Pro buggy.

Brand New 110cc engine SEMI with e/start and kick start, the starter motor is on the top.

 It will fit most Chinese 110cc dirt bikes/quads /buggies/karts

 Engine Size       107CC
 Gear System       4 gears, Semi-auto, 1-N-2-3-4 CIRCLE
 Type                     Horizontal, single-cylinder, 4-stroke, air-cooled
 Start Method        Electrical Start and Kick Start
 Bore x Stroke         52.5mm x 49.5mm
 Compression ratio      9.0:1
 Front sprocket      #420

We have all the accessories for this engine in stock, like the wiring harness, carby, air filter,  electrical parts(CDI unit, coil, kill switch), exhaust pipe & muffler. Please view our listings or contact us for more details.

The size of this tyre+tube is 3.00-10 (80/100-10). Off road tread, you will receive 1xtyre and 1 tube.

This axle will fit our 90cc Sahara and Sahara Pro buggy. length 860mm, 20mm bearing

 GO KART WHEEL BRAND NEW IN BLACK

Size: 10x4.50-5

3 STUD RIM&TYRE, WILL FIT MOST GO KART/HUFFY SLIDER/DRIFT TRIKE/BUGGY/PROJECT.

Distance from bolt hole to next bolt hole: 50mm

Diameter of central hole for axle: 40mm

GO KART WHEEL BRAND NEW IN BLACK

Size: 11x7.10-5

3 STUD RIM&TYRE, WILL FIT MOST GO KART/HUFFY SLIDER/DRIFT TRIKE/BUGGY/PROJECT.

Distance from bolt hole to next bolt hole: 50mm

Diameter of central hole for axle: 40mm

Suspension lower arm

You will receive 1 arm.

upper arm---for our 200cc 300cc buggies.

You will receive 1 arm.

41T Teeth 428 Chain Rear Back Sprocket Cog PIT TRAIL DIRT BIKE ATV KART BUGGY

This chain guard will fit on 5.5hp/6.5hp Honda GX statonary engines, for go kart/trift trike/project.

This set of pedals(throttle pedal,brake pedal) will fit on 6.5hp/9hp go kart/drift trike/project. Coming with extensions for adjustment of distances.

length: around 660mm, will fit on chinese quad/atv 50/70/90/110/125cc models.

length: around 780mm, will fit on chinese quad/atv 50/70/90/110/125cc models.

Brake Disc

FOR QUAD/DIRT/Gokart/Buggy BIKES

Disc Diameter: 138 mm

Inner Diameter: 29 mm

Bolt Hole Distance: 33 mm

Thickness of Disc: 2.0 mm

Brake Disc

FOR QUAD/DIRT/Gokart/Buggy BIKES

Disc Diameter: 138 mm

Inner Diameter: 29 mm

Bolt Hole Distance: 33 mm

Thickness of Disc: 2.0 mm

Fit on 22mm handle bar.

Diameter of mount hole is 10mm. Fit most 150/250/300cc buggies as

front shocks.

spring thickness: 8.5mm

Brand New 49cc pull start+carby+clutch for 49cc quad or dirt bike/scooter. 

You will receive 1xpull start(please check it is the same one as yours. the teeth are alloy. ), 1xclutch, 1xcarby.

Honda Clone/Stationary GX200(6.5HP) GX160(5.5HP) Air Filter Adapter 

Description: 

Aftermarket air filter setup for Honda GX160/200 Clone

Everything you need to get an aftermarket air filter on your Honda/Clone gx160/200.

Auction includes:

(1) Air Filter CNC Alloy Adapter
(1) Angled Air Filter
(1) Air Box to Carb 
(1) Choke Hold Bracket

Steel Pod Air Filter Cleaner+ Carby Adaptor 49cc PIT Dirt Pocket Quad Bike ATV

Brand New Steel Pod Air Filter Cleaner + Carby Adaptor Fit 49cc Mini PIT DIRT QUAD BIKE ATV

For 14 inch front wheel, PIT PRO Bike Trail Bike Dirt Bike PIT Bike.

 This case will fit most chinese 4 stroke 110/125cc engines, for quads/dirt bike/atv/buggy.

Honda Clone/Stationary GX200 GX160 Muffler

Description: 

Muffler on your Honda/Clone gx160/200 5.5hp/6.5hp

Item includes:

1xMuffler kit

Cable

Length: 82cm

Distance travel: 11cm.

Housing : 22mm

• Mini Moto Dirtbike Pocket Bike handlebar clamp Set
• The lower part bolts to the top yolk and the top clamp fits over the handlebars
• Comes with bolts as pictured
• Fits Minimoto Pocket Bike Dirtbikes but may also fit other models such as Motards and some racing bike styles
• handlebar size: 22mm or 7/8"
• you will receive a pair

A pair Upside Down front forks fit on 49cc dirtbike/pocket bike. 

RED/GOLDEN/BLUE/YELLOW

Please select a color.

• A handlebar clamp Set with bolts
• Fits ATV/quad/mini bike/pocket rocket bike/other project
• handlebar size: 22mm or 7/8"
• you will receive a pair clamps

BRAND NEW

20mm Axle Assembly  Length 700mm

Fit Most
Project, Go Kart,HuFFy Slider ,Drift Trike.

Hub Size:  Fit 15mm axle(Bearing size is 6002RS)
Item has been known to fit:
 ATV/quad/go kart/drift/trike
70/90/110/125/200cc
Petrol scooter and electric scooter
You will get : 1xHub

Size:
Distance between mounting holes(centre to centre): Approx. 78mm

Hub Size:  Fit 17mm axle with 17 splines
Item has been known to fit:
 ATV/quad/go kart/drift/trike
70/90/110/125/200cc
Petrol scooter and electric scooter
You will get : 1xHub

Size:
Distance between mounting holes(centre to centre): Approx. 78mm

23T Spline 4 Stud 25mm Rear Axle Wheel Hub will fit Quad/Dirt Bike/ATV/UTV/Buggy.

This listing is for 1 hub, not 2 hubs. Thanks

BRAND NEW

performence carby airfilter throttle cable Kit

SUIT

6.5hp stationary motor/go kart/drift trike/project

This set training wheels are mounting on the footrest and fit our 49cc dirt bikes.

If you need more details, please feel free to contact us. thank you

   This set training wheels are mounting on the footrest and fit our 49cc dirt bikes.

If you need more details, please feel free to contact us. thank you

1 pairs disc brake pads for most chinese bike,quad,atv,dirt bike,buggy,trike.1 pair= 2 pads

IMPORTANT：PLEASE COMPARE WITH YOUR OLD PARTS TO MAKE SURE FIT

#35 52 links chain will fit most dirt bike/quad/atv/buggy. length: around 25CM

#35 86 links chain will fit most dirt bike/quad/atv/buggy. length: around 41CM

#T8F 88links chain will fit most dirt bike/quad/atv/buggy. length: around 35cm.

#T8F 134 links chain will fit most dirt bike/quad/atv/buggy. length: around 54cm.

#T8F 124 links chain will fit most dirt bike/quad/atv/buggy. length: around 50cm.

pink red blue green avalible ,please pick up a color after you pay,thank you!

Brand New 49cc pull start 49cc quad or dirt bike/scooter. 

You will receive 1xpull start.

200cc/250cc/300cc regulator

110x88x40mm

Voltage Regulator of 250cc with2 wires in two female plugs.

(yellow+yellow+yellow）+（green+red）

For Go Karts, Mopeds, Scooters, Buggy and ATV.

BRAND NEW

40mm Axle Assembly  Length 960mm

Fit Most

Project, Go Kart, HuFFy Slider ,Drift Trike.

We have other hubs/collars/bearings to fit this axle, please search items in our store.

BRAND NEW

SPROCKET DISC CARRIER HUB 25MM AXLE

Fit Most

Project, Go Kart, HuFFy Slider ,Drift Trike.

BRAND NEW

CNC BEARING COLLAR FIT BEARING UC208/40MM

Fit Most

Project, Go Kart, HuFFy Slider ,Drift Trike.

You will receive one COLLAR

BRAND NEW

CNC BEARING COLLAR FIT BEARING UC208/40MM

Fit Most

Project, Go Kart, HuFFy Slider ,Drift Trike.

You will receive one COLLAR

BRAND NEW

SPROCKET DISC WHEEL CARRIER HUB 40MM AXLE

Fit Most

Project, Go Kart, HuFFy Slider ,Drift Trike.

You will receive one carrier/hub.

Measurement(approximately) :

 Eye center to center:  235mm
 Mounting hole diameter: 8mm, fit our 6.5hp/9hp go karts.

This set piston and rings will fit most Chinese 9HP/GX270 engine.