BRAND NEW
25mm Axle Assembly Length 870mm
Fit Most
Project, Go Kart,HuFFy Slider ,Drift Trike.
4.10- 4" Inch Wheel Rim + Tyre Tire ESKY Mini Quad Bike ATV Buggy 15mm with 6mm keyway
Size: 4 inch /4.10-4
Diameter of the central hole for axle: 15mm /6mm keyway
Heavy duty rim +tyre.
Brand New Gearbox
This set is used on our 9hp go-kart/drift trike.
These replacement clutch boxes come as complete units and are ready to be fitted to your engine.
Fits the Honda GX240 - GX390 range and most Chinese 9hp to 13hp clone engines with 25mm diameter and 60mm long output shafts, also known as the L-type PTO shaft option.
Requires a 60mm long, 25mm diameter crankshaft input, output is to a 22mm shaft, also known as the R-type PTO shaft.
Ready to assemble, they give incredible torque at lower engine speeds and are ideal replacements on go-karts, mixers, pumps, etc.
This is a carefully selected replacement part of the highest quality, and also at an affordable price too.
DETAILS:
• Type: 2:1 Reduction
• Input Shaft: 25mm Diameter, 60mm Long
• Input Shaft Keyway: 7mm
• Input Mounting Holes: 90mm Square
• Output Shaft: 22mm Diameter, 50mm Long
• Output Shaft Keyway: 7mm
• Output Mounting Holes: 70mm Square
Please Note: The gearbox is supplied without oil, and requires oil before use. This is typically the same as you would use in the engine sump i.e an SAE30 4-stroke small engine oil.
Brand New starter motor with the starter solenoid/relay
-
For Honda GX240 and GX270 8HP and 9Hp series Stationary Engines and Chinese Copy Stationary Engines.
- 12 volt
- 14 teeth Gear
Brand New 80/100-12 Inch Knobby Tyre + Tube with 190mm disc.
For Motorbikes Motocross Dirt bikes
wheel Size: 80/100-12 tyre +tube
Axle hole size: 12mm
You will receive a complete wheel with a disc.
Brand New 110cc engine SEMI with e/start and kick start, the starter motor is on the top.
It will fit most Chinese 110cc dirt bikes/quads /buggies/karts
Engine Size 107CC
Gear System 4 gears, Semi-auto, 1-N-2-3-4 CIRCLE
Type Horizontal, single-cylinder, 4-stroke, air-cooled
Start Method Electrical Start and Kick Start
Bore x Stroke 52.5mm x 49.5mm
Compression ratio 9.0:1
Front sprocket #420
We have all the accessories for this engine in stock, like the wiring harness, carby, air filter, electrical parts(CDI unit, coil, kill switch), exhaust pipe & muffler. Please view our listings or contact us for more details.
The size of this tyre+tube is 3.00-10 (80/100-10). Off road tread, you will receive 1xtyre and 1 tube.
This axle will fit our 90cc Sahara and Sahara Pro buggy. length 860mm, 20mm bearing
GO KART WHEEL BRAND NEW IN BLACK
Size: 10x4.50-5
3 STUD RIM&TYRE, WILL FIT MOST GO KART/HUFFY SLIDER/DRIFT TRIKE/BUGGY/PROJECT.
Distance from bolt hole to next bolt hole: 50mm
Diameter of central hole for axle: 40mm
GO KART WHEEL BRAND NEW IN BLACK
Size: 11x7.10-5
3 STUD RIM&TYRE, WILL FIT MOST GO KART/HUFFY SLIDER/DRIFT TRIKE/BUGGY/PROJECT.
Distance from bolt hole to next bolt hole: 50mm
Diameter of central hole for axle: 40mm
41T Teeth 428 Chain Rear Back Sprocket Cog PIT TRAIL DIRT BIKE ATV KART BUGGY
This chain guard will fit on 5.5hp/6.5hp Honda GX statonary engines, for go kart/trift trike/project.
This set of pedals(throttle pedal,brake pedal) will fit on 6.5hp/9hp go kart/drift trike/project. Coming with extensions for adjustment of distances.
length: around 660mm, will fit on chinese quad/atv 50/70/90/110/125cc models.
length: around 780mm, will fit on chinese quad/atv 50/70/90/110/125cc models.
Brake Disc
FOR QUAD/DIRT/Gokart/Buggy BIKES
Disc Diameter: 138 mm
Inner Diameter: 29 mm
Bolt Hole Distance: 33 mm
Thickness of Disc: 2.0 mm
Brake Disc
FOR QUAD/DIRT/Gokart/Buggy BIKES
Disc Diameter: 138 mm
Inner Diameter: 29 mm
Bolt Hole Distance: 33 mm
Thickness of Disc: 2.0 mm
Fit on 22mm handle bar.
Diameter of mount hole is 10mm. Fit most 150/250/300cc buggies as
front shocks.
spring thickness: 8.5mm
Brand New 49cc pull start+carby+clutch for 49cc quad or dirt bike/scooter.
You will receive 1xpull start(please check it is the same one as yours. the teeth are alloy. ), 1xclutch, 1xcarby.
Honda Clone/Stationary GX200(6.5HP) GX160(5.5HP) Air Filter Adapter
Description:
Aftermarket air filter setup for Honda GX160/200 Clone
Everything you need to get an aftermarket air filter on your Honda/Clone gx160/200.
Auction includes:
(1) Air Filter CNC Alloy Adapter
(1) Angled Air Filter
(1) Air Box to Carb
(1) Choke Hold Bracket
Steel Pod Air Filter Cleaner+ Carby Adaptor 49cc PIT Dirt Pocket Quad Bike ATV
Steel Pod Air Filter Cleaner+ Carby Adaptor 49cc PIT Dirt Pocket Quad Bike ATV
Brand New Steel Pod Air Filter Cleaner + Carby Adaptor Fit 49cc Mini PIT DIRT QUAD BIKE ATV
INNER DIAMETER OF AIR FILTER CONNECTOR | approx 42mm |
LENGTH OF THE AIR FILTER | approx 50mm |
DISTANCE BETWEEN ADAPTOR MOUNTING HOLES (CENTRE TO CENTRE) | approx 40mm |
This case will fit most chinese 4 stroke 110/125cc engines, for quads/dirt bike/atv/buggy.
Honda Clone/Stationary GX200 GX160 Muffler
Description:
Muffler on your Honda/Clone gx160/200 5.5hp/6.5hp
Item includes:
1xMuffler kit
- Mini Moto Dirtbike Pocket Bike handlebar clamp Set
- The lower part bolts to the top yolk and the top clamp fits over the handlebars
- Comes with bolts as pictured
- Fits Minimoto Pocket Bike Dirtbikes but may also fit other models such as Motards and some racing bike styles
- handlebar size: 22mm or 7/8"
- you will receive a pair
A pair Upside Down front forks fit on 49cc dirtbike/pocket bike.
RED/GOLDEN/BLUE/YELLOW
Please select a color.
- A handlebar clamp Set with bolts
- Fits ATV/quad/mini bike/pocket rocket bike/other project
- handlebar size: 22mm or 7/8"
- you will receive a pair clamps
BRAND NEW
20mm Axle Assembly Length 700mm
Fit Most
Project, Go Kart,HuFFy Slider ,Drift Trike.
Hub Size: Fit 15mm axle(Bearing size is 6002RS)
Item has been known to fit:
ATV/quad/go kart/drift/trike
70/90/110/125/200cc
Petrol scooter and electric scooter
You will get : 1xHub
Size:
Distance between mounting holes(centre to centre): Approx. 78mm
Hub Size: Fit 17mm axle with 17 splines
Item has been known to fit:
ATV/quad/go kart/drift/trike
70/90/110/125/200cc
Petrol scooter and electric scooter
You will get : 1xHub
Size:
Distance between mounting holes(centre to centre): Approx. 78mm
23T Spline 4 Stud 25mm Rear Axle Wheel Hub will fit Quad/Dirt Bike/ATV/UTV/Buggy.
This listing is for 1 hub, not 2 hubs. Thanks
BRAND NEW
performence carby airfilter throttle cable Kit
SUIT
6.5hp stationary motor/go kart/drift trike/project
This set training wheels are mounting on the footrest and fit our 49cc dirt bikes.
If you need more details, please feel free to contact us. thank you
This set training wheels are mounting on the footrest and fit our 49cc dirt bikes.
If you need more details, please feel free to contact us. thank you
1 pairs disc brake pads for most chinese bike,quad,atv,dirt bike,buggy,trike.1 pair= 2 pads
IMPORTANT:PLEASE COMPARE WITH YOUR OLD PARTS TO MAKE SURE FIT
#35 52 links chain will fit most dirt bike/quad/atv/buggy. length: around 25CM
#35 86 links chain will fit most dirt bike/quad/atv/buggy. length: around 41CM
#T8F 88links chain will fit most dirt bike/quad/atv/buggy. length: around 35cm.
#T8F 134 links chain will fit most dirt bike/quad/atv/buggy. length: around 54cm.
#T8F 124 links chain will fit most dirt bike/quad/atv/buggy. length: around 50cm.
pink red blue green avalible ,please pick up a color after you pay,thank you!
Brand New 49cc pull start 49cc quad or dirt bike/scooter.
You will receive 1xpull start.
200cc/250cc/300cc regulator
110x88x40mm
Voltage Regulator of 250cc with2 wires in two female plugs.
(yellow+yellow+yellow)+(green+red)
For Go Karts, Mopeds, Scooters, Buggy and ATV.
BRAND NEW
40mm Axle Assembly Length 960mm
Fit Most
Project, Go Kart, HuFFy Slider ,Drift Trike.
We have other hubs/collars/bearings to fit this axle, please search items in our store.
BRAND NEW
SPROCKET DISC CARRIER HUB 25MM AXLE
Fit Most
Project, Go Kart, HuFFy Slider ,Drift Trike.
BRAND NEW
CNC BEARING COLLAR FIT BEARING UC208/40MM
Fit Most
Project, Go Kart, HuFFy Slider ,Drift Trike.
You will receive one COLLAR
BRAND NEW
CNC BEARING COLLAR FIT BEARING UC208/40MM
Fit Most
Project, Go Kart, HuFFy Slider ,Drift Trike.
You will receive one COLLAR
BRAND NEW
SPROCKET DISC WHEEL CARRIER HUB 40MM AXLE
Fit Most
Project, Go Kart, HuFFy Slider ,Drift Trike.
You will receive one carrier/hub.
Measurement(approximately) :
Eye center to center: 235mm
Mounting hole diameter: 8mm, fit our 6.5hp/9hp go karts.
BRAND NEW
SPROCKET DISC CARRIER HUB 25MM AXLE
Fit Most
Project, Go Kart, HuFFy Slider ,Drift Trike.
BRAND NEW
SPROCKET DISC CARRIER HUB 25MM AXLE
Fit Most
Project, Go Kart, HuFFy Slider ,Drift Trike.
It comes with:
1x axle 87cm length ø27
1xsprocket #428 37 teeth
1xdisc 3mm thickness
1xdisc hub with 23 splines
1xsprocket hub with 23 splines
2xbearing holders housing 25mm.
2xwheel hubs 25mm
bolts and nuts ,spacers.
BRAND NEW
RIGHT HAND BRAKE LEVER WITH RESERVOIR for the 50CC to 250CC dirt bike and ATV
It's connect M10 oil line
Net Weight:260g
SUIT 22MM HANDLE BAR
200mm Length , 8MM Bolt hole. Will Fit Most Chinese 49CC Dirt Bike/Quads/Go karts.
330MM Length , 10MM Bolt hole. Will Fit Most Chinese 49CC Dirt Bike/Quads/Go karts.
Brand New Hydraulic Disc Brake Single Piston Caliper with Master Cylinder & Brake Pads Brake System Fit drift trike/buggy /atv/kart
Brand New Hydraulic Rear Disc Brake Single Piston Caliper with Master Cylinder & Brake Pads Brake System Fit drift trike/buggy /atv/kart
Measurement(approximately) :
Eye center to center: 275mm
Mounting hole diameter: 10mm,
BRAND NEW
25mm Axle Assembly Length 580mm
Fit Most
Project, Go Kart,HuFFy Slider ,Drift Trike. Esky
Diameter of mount hole is 10mm. Fit most 125/150/250/300cc buggies as
front/rear shocks. 300mm
spring thickness: 8.5mm
Diameter of mount hole is 10mm. Fit most 125/150/250/300cc buggies as
front/rear shocks. 325mm
spring thickness: 8.5mm
BRAND NEW
25mm Axle Assembly Length 850mm
Fit Most
JEEP ,Project, Go Kart, HuFFy Slider ,Drift Trike.
12mm 220mm + 3 Spacers Front Back Rear Axle 70cc 90cc PIT PRO Trail Dirt Bike
Brand New 12mm 220mm Three Spacers Front Rear Axle for PIT PRO Trail Dirt Bike Thumpstar
LENGTH OF AXLE (AXLE BODY INCLUDING THREAD PART, NOT INCLUDE SOLID NUT HEAD) | approx 225mm |
DIAMETER OF AXLE | approx 12mm |
Brand New Hydraulic Disc Brake Caliper with Master Cylinder & Brake Pads Brake System Fit Drift Trike HuFFy Slider Go Kart Buggy,right hand side .22mm
Brand New Hydraulic Disc Brake Caliper with Master Cylinder & Brake Pads Brake System Fit Drift Trike HuFFy Slider Go Kart Buggy,LEFT REAR hand side .22mm
Brake Disc
FOR QUAD/DIRT/Gokart/Buggy BIKES
Disc Diameter: 186 mm
Inner Diameter: 76 mm
Bolt Hole Distance(opposite): 100 mm
Thickness of Disc: 3.0 mm
Features:
Brand New High Quality13mm carby+Airfilter
Lever choke Carburetor
Size:
Intake Diameter:13mm
Distance between mount holes (centre to centre ): 38mm
Fitment:
15mm 220mm + 3 Spacers Front Back Rear Axle 70cc 90cc PIT PRO Trail Dirt Bike
Brand New 15mm 220mm Three Spacers Front Rear Axle for PIT PRO Trail Dirt Bike Thumpstar
LENGTH OF AXLE (AXLE BODY INCLUDING THREAD PART, NOT INCLUDE SOLID NUT HEAD) | approx 225mm |
DIAMETER OF AXLE | approx 15mm |
1 pairs disc brake pads for drift trike.
1 pair= 2 pads
IMPORTANT:PLEASE COMPARE WITH YOUR OLD PARTS TO MAKE SURE FIT
A Pair (x2) Front stub axle spindle 15mm Go kart Buggy Project
Bearings: 6001rs (x4)
Will fit most chinese 6.5hp/9hp go karts.
AT 18X7.00-8, 8 inch 4 stud wheel.
The diameter of the central hole is 90mm.
The distance of the opposite holes is 110mm
The distance of 2 next holes is 78mm.
This wheel fit our mini willy jeep
8 inch wheel 18x7-8 with 20 splines /20mm hole . It fit our FORZA 3 buggy as a rear wheel.
8 inch wheel 18x7-8 with 20mm bearing hole . It fit our FORZA 3 buggy as a front wheel
10 inch wheel , 22x10-10 . 4 stud/holes.
The diameter of the central hole is 110mm.
The distance of the opposite holes is 135mm
It fit our FORZA 5/7 buggy as a rear wheel.
10 inch wheel , 22x10-10 . 4 stud/holes.Alloy Rim.
The diameter of the central hole is 75mm.
The distance of the opposite holes is 135mm
It fit our FORZA 5/7 buggy as a rear wheel.
10 inch wheel , 21x7-10 . 4 stud/holes.Alloy Rim.
The diameter of the central hole is 75mm.
The distance of the opposite holes is 110mm
It fit our FORZA 5/7 buggy as a front wheel.
10 inch wheel , 21x7-10 . 4 stud/holes.Steel Rim.
The diameter of the central hole is 75mm.
The distance of the opposite holes is 110mm
It fit our FORZA 5/7 buggy as a front wheel.
Product Description
This is a brand new Clutch Assembly to fit our 300cc buggy/utv
Please also check with the old part on your bike to make sure it is the correct one.
#530H 52 links chain will fit our FORZA 5/FORZA 7/K5/K7 BUGGIES. length: around 41CM
Brand New 12V ignition coil lead fits most Chinese 4-stroke bikes/quad/ATV/buggy/trike. It fits our 200cc/300cc buggies. You will receive one coil.
Brand New 49cc pull start+carby+clutch for 49cc quad or dirt bike/scooter.
You will receive 1x easy pull start, 1xclutch, 1xcarby.
#T8F 110links chain will fit most dirt bike/quad/atv/buggy. length: around 44cm.
2 x F7TC Spark Plugs will fit most GX110/120/140/160/200/270 OR 2.5HP/5.5HP/6.5HP/7.5HP/9HP LIFAN HONDA ENGINES.
You will receive 2 spark plugs.
2 xNGK D8TC Spark Plugs will fit most 200/250cc chinese bike/quad/buggy/atv/trike. More sparking and easy to start engine.
You will receive 2 spark plugs.
2 x A7TC Spark Plugs will fit most 50-160cc chinese bike/quad/buggy/atv/trike.
You will receive 2 spark plugs.
This shock comes with a spring of 6mm thickness, and a mounting hole of 10mm.
Length: center to center 285mm.
It is used on our 9hp kart as a front shock.
You will receive 1x shock for this listing.
This oil dipstick will fit our 6.5hp/9hp karts/drift trikes/buggies. It comes with a rubber sealing ring
Brand New Oil Lever Dip Stick Dipstick for PIT Quad Dirt Bike ATV Dune Buggy
The total length is around 85mm DIAMETER OF THREAD around 19mm |
This shock comes with a spring of 8mm thickness, and a mounting hole of 10mm.
Length: center to center 310mm.
It is used on our 125cc 3+1 quad as a front shock.
You will receive 1x shock for this listing.
49cc go kart Front Stub Axle Strut Rod Knuckle Support Left/Right
You will receive one strut axle, please choose left side or right side.
BRAND NEW
SPROCKET DISC CARRIER HUB 20MM AXLE. It fits on our 80cc ESKY.
Fit Most project, Go Kart, HuFFy Slider, Drift Trike.
BRAND NEW
25mm Axle Assembly Length 845mm
It fits our mini Willy Jeep with a back engine.
Fit Most
JEEP, Project, Go Kart, HuFFy Slider, Drift Trike.
This listing is for 1x shock.
This Shock fits on our mini Willy Jeep as the front shock.
Eye to Eye center: 290mm
Bolt hole: 10mm
Spring diameter:8mm
This listing is for 1x shock.
This Shock fits on our mini Willy Jeep as the rear shock.
Eye to Eye center: 270mm
Bolt hole: 10mm
Spring diameter:8mm
#T8F 86 links chain will fit most dirt bike/quad/atv/buggy. length: around 345mm.
Brand New Recoil Pull Starter Fit 43cc/49cc Mini PIT Dirt Pocket Bike Mini Quad ATV Pocket Rocket. 4 Bolts Fixed.
It will fit our 49cc karts