12mm PE Sleeves Huffy Slider Drift Trike Polyethylene Molding 11x7.10-5
Fit go kart rear wheel (11x7.10-5)
Extra Thicker 12mm black sleeves
PE Drift Trike Sleeves
Polyethylene Injection Molding not PVC
Inner diameter: 270mm
Outer diameter: 292mm
Deep: 150mm
Thickness: 12mm
Smooth Edges,Easily fit.
The sale for 1 pair PE sleeves (2 sleeves)
Brand New 49cc pull start 49cc quad or dirt bike/scooter.
You will receive 1xpull start.
AT 18X7.00-8, 8 inch 4 stud wheel.
The diameter of the central hole is 90mm.
The distance of the opposite holes is 110mm
The distance of 2 next holes is 78mm.
This wheel fit our mini willy jeep
RECOIL PULL STARTER ASSEMBLY FOR HONDA GX160-200 5.5HP 6.5HP ENGINES, FIT ON GO KARTS/DRIFT TRIKES
BOLT STRAIGHT ON.
Replacement Part.
Dimensions : 175x175x40mm
Suits GX110, GX140, GX160, GX200
#420 108 links chain will fit most dirt bike/quad/atv/buggy. length: around 132cm.
Travel distance: around 120mm.
This set training wheels are mounting on the footrest and fit our 49cc dirt bikes.
If you need more details, please feel free to contact us. thank you
This tie rod will fit on a 49cc/6.5 hp go kart.
The basic length is around 630mm, the adjustment distance is around 60mm. The bolt hole is 10mm.
A Pair (x2) Front stub axle spindle 15mm Go kart Buggy Project
Bearings: 6001rs (x4)
Will fit most chinese 6.5hp/9hp go karts.
Diameter of mount hole is 10mm. Fit most 125/150/250/300cc buggies as
front/rear shocks. 300mm
spring thickness: 8.5mm
#35 86 links chain will fit most dirt bike/quad/atv/buggy. length: around 41CM
SPROCKET
FOR QUAD/DIRT/Go kart/Buggy BIKES
50cc/70cc/90cc/110cc/125cc/150/200/250CC
Sprocket Diameter: 248 mm
Inner Diameter: 48 mm
Bolt Hole Distance: 68 mm/85mm
#T8F 88links chain will fit most dirt bike/quad/atv/buggy. length: around 35cm.
23T Spline 4 Stud 25mm Rear Axle Wheel Hub will fit Quad/Dirt Bike/ATV/UTV/Buggy.
This listing is for 1 hub, not 2 hubs. Thanks
This set training wheels are mounting on the footrest.
NEW MOTORCYCLE TRAINING WHEELS FOR 2 STROKE 49CC/50CC DIRT BIKE.
Hub Size: Fit 15mm axle(Bearing size is 6002RS)
Item has been known to fit:
ATV/quad/go kart/drift/trike
70/90/110/125/200cc
Petrol scooter and electric scooter
You will get : 1xHub
Size:
Distance between mounting holes(centre to centre): Approx. 78mm
Fit an axle of 16mm/16 splines
Brand New 49cc pull start+carby+clutch for 49cc quad or dirt bike/scooter.
You will receive 1xpull start(please check it is the same one as yours. the teeth are alloy. ), 1xclutch, 1xcarby.
Carburetor Honda GX160 GX200 5.5HP 6.5HP Stationary Engine Carby Drift GoKart
Fit ATV Quad Pit Pro Dirt Bike Buggy
Features:
Brand New 4 Pin Male Plug Ignition Key Barrel.
Item number: Ky04
Brand New 49cc pull start+carby+clutch for 49cc quad or dirt bike/scooter.
You will receive 1x easy pull start, 1xclutch, 1xcarby.
1 pairs disc brake pads for drift trike.
1 pair= 2 pads
IMPORTANT:PLEASE COMPARE WITH YOUR OLD PARTS TO MAKE SURE FIT
BRAND NEW
25mm Axle Assembly Length 850mm
Fit Most
JEEP ,Project, Go Kart, HuFFy Slider ,Drift Trike.
Brand New Hydraulic Rear Disc Brake Single Piston Caliper with Master Cylinder & Brake Pads Brake System Fit drift trike/buggy /atv/kart
Brand new 215cm length FOOT PEDAL throttle cable will fit 4 stroke GO KART/drift trike/project/buggy.
#T8F 134 links chain will fit most dirt bike/quad/atv/buggy. length: around 54cm.
#35 52 links chain will fit most dirt bike/quad/atv/buggy. length: around 25CM
1 pairs disc brake pads for most chinese bike,quad,atv,dirt bike,buggy,trike.1 pair= 2 pads
IMPORTANT:PLEASE COMPARE WITH YOUR OLD PARTS TO MAKE SURE FIT
This set training wheels are mounting on the footrest and fit our 49cc dirt bikes.
If you need more details, please feel free to contact us. thank you
Honda Clone/Stationary GX200(6.5HP) GX160(5.5HP) Air Filter Adapter
Description:
Aftermarket air filter setup for Honda GX160/200 Clone
Everything you need to get an aftermarket air filter on your Honda/Clone gx160/200.
Auction includes:
(1) Air Filter CNC Alloy Adapter
(1) Angled Air Filter
(1) Air Box to Carb
(1) Choke Hold Bracket
Brand New 12V ignition coil lead with spark plug,CDI, solenoid,regulator will Fit most chinese 4 stroke bike/quad/atv/buggy/trike.
Package includes:
1 x regulator
1 x ignition coil.
1 x CDI box.
1 x spark plug
1 x solenoid
This shock comes with a spring of 6mm thickness, and a mounting hole of 10mm.
Length: center to center 285mm.
It is used on our 9hp kart as a front shock.
You will receive 1x shock for this listing.
10 inch wheel , 22x10-10 . 4 stud/holes.
The diameter of the central hole is 110mm.
The distance of the opposite holes is 135mm
It fit our FORZA 5/7 buggy as a rear wheel.
This axle will fit our 90cc Sahara and Sahara Pro buggy. length 860mm, 20mm bearing
This artificial leather seat will fit on most Chinese twin/single seat buggies 50/70/90/110/125/150/250cc/300cc and go-kart/trike, adult size
You will receive one BLACK seat, thanks
Measurement(approximately) :
Eye center to center: 275mm
Mounting hole diameter: 10mm,
This listing is for a set(pair) chain tension adjuster.
Color: Yellow,silver,blue,black,red.
We will send a random color set.
WET GO KART WHEEL BRAND NEW IN BLACK
Size: 10x4.50-5
3 STUD RIM&TYRE, WILL FIT MOST GO KART/HUFFY SLIDER/DRIFT TRIKE/BUGGY/PROJECT.
Distance from bolt hole to next bolt hole: 50mm
Diameter of central hole for axle: 40mm
200mm Length , 8MM Bolt hole. Will Fit Most Chinese 49CC Dirt Bike/Quads/Go karts.
Length : 45cm
3 holes to hold steering wheel.
We have steering wheel / the ball join/tie rods to fit on this pole.
Brand New 80/100-10 Inch Knobby Tyre + Tube with 190mm disc and 37T 420# sprocket.
For Motorbikes Motocross Dirt bikes
wheel Size: 80/100-10 tyre +tube
Axle hole size: 12mm
Measurement(approximately) :
Eye center to center: 235mm
Mounting hole diameter: 8mm, fit our 6.5hp/9hp go karts.
BRAND NEW
27mm Axle Assembly Length 870mm
Fit Most
Project, Go Kart,HuFFy Slider ,Drift Trike.
Brand New Hydraulic Rear Disc Brake Single Piston Caliper with Master Cylinder & Brake Pads Brake System Fit 50cc 70cc 90cc 110cc 125cc 140cc 150cc Qua ATV PIT PRO PIT Bike Trail Bike Dirt Bike Thumpstar
- Mini Moto Dirtbike Pocket Bike handlebar clamp Set
- The lower part bolts to the top yolk and the top clamp fits over the handlebars
- Comes with bolts as pictured
- Fits Minimoto Pocket Bike Dirtbikes but may also fit other models such as Motards and some racing bike styles
- handlebar size: 22mm or 7/8"
- you will receive a pair
Hub Size: 17mm 17spline 3 stud
Item has been know to fit:
ATV/quad/go kart/drift/trike
70/90/110/125/200cc
Petrol scooter and electric scooter
You will get : 2xHubs.
Size:
Distance between mounting holes(centre to centre): Approx. 50mm
This chain guard will fit on 5.5hp/6.5hp Honda GX statonary engines, for go kart/trift trike/project.
Solenoid Relay Fit 110cc 125cc 140cc 200cc 250cc PIT PRO PIT Bike Trail Bike Dirt Bike Thumpstar Quad Bike ATV GO Kart Dune Buggy
Brand New Ignition CDI UNIT Fit 250cc PIT PRO Bike Trail Bike Dirt Bike Quad ATV Dune Buggy
NEW 6 pin CDI to fit 200cc/250cc/300cc Dune Buggy(Kinroad, Sahara, Kandi,Fuxin, Twister)
Brand New Recoil Pull Starter Fit 43cc/49cc Mini PIT Dirt Pocket Bike Mini Quad ATV Pocket Rocket. 4 Bolts Fixed.
It will fit our 49cc karts
Brand New 48T Teeth Rear Sprocket Cog Fit 428 Chain PIT TRAIL DIRT BIKE MOTORCROSS
- Mount hole distance (eye - eye): 250mm
- Overall dimensions: 850mm x 440mm x 350mm
- Stub axle thickness: 15mm
- Suspension (eye - eye): 280mm
- Brake caliper mount hole distance: 50mm
It will fit our 9hp go kart.
#T8F 110links chain will fit most dirt bike/quad/atv/buggy. length: around 44cm.
This gear shift cable will fit many chinese 250cc quad/atv/buggy/go kart. the length is around 1450mm.
Features:
Brand New High Quality13mm carby+Airfilter
Lever choke Carburetor
Size:
Intake Diameter:13mm
Distance between mount holes (centre to centre ): 38mm
Fitment:
Fit an axle of 15mm with 6mm keyway
Brand New Hydraulic Disc Brake Caliper with Master Cylinder & Brake Pads Brake System Fit Drift Trike HuFFy Slider Go Kart Buggy,right hand side .22mm
You will get : 1 wheel
Size:
Diameter of the axle hole: 15mm
Sprocket: #420-37
BRAND NEW
RIGHT HAND BRAKE LEVER WITH RESERVOIR for the 50CC to 250CC dirt bike and ATV
It's connect M10 oil line
Net Weight:260g
SUIT 22MM HANDLE BAR
It comes with:
1x axle 87cm length ø27
1xsprocket #428 37 teeth
1xdisc 3mm thickness
1xdisc hub with 23 splines
1xsprocket hub with 23 splines
2xbearing holders housing 25mm.
2xwheel hubs 25mm
bolts and nuts ,spacers.
BRAND NEW
SPROCKET DISC CARRIER HUB 25MM AXLE
Fit Most
Project, Go Kart, HuFFy Slider ,Drift Trike.
wheel Size:90/100-14 tyre +tube
Axle hole size: 12mm
You will receive a complete wheel .
Brand New 2.50-14 Inch Knobby Tyre + Tube with 190mm disc.
For Motorbikes Motocross Dirt bikes
wheel Size: 2.5-14 tyre +tube
Axle hole size: 12mm
You will receive a complete wheel with a disc.
Brand New 12 Inch Knobby Tyre + Tube
For Motorbikes Motocross Dirt bikes
Size:
3.00-12
80/100-12
tyre +tube
You will receive a tube and a tyre.
7/8" 22.2MM 13 Tooth #428 Chain SPROCKET Go Kart/buggy/drift trike GX240/270 8HP 9HP , 8MM KEYWAY.
200cc/250cc/300cc regulator
110x88x40mm
Voltage Regulator of 250cc with2 wires in two female plugs.
(yellow+yellow+yellow)+(green+red)
For Go Karts, Mopeds, Scooters, Buggy and ATV.
This gear shift cable will fit many chinese 250cc quad/atv/buggy/go kart. the length is around 1200mm.
Brand new 104cm length handle lever brake cable will fit small dirt bike/kart/drift trike/project/buggy.
BRAND NEW
performence carby airfilter throttle cable Kit
SUIT
6.5hp stationary motor/go kart/drift trike/project
BRAND NEW
20mm Axle Assembly Length 700mm
Fit Most
Project, Go Kart,HuFFy Slider ,Drift Trike.
A pair Upside Down front forks fit on 49cc dirtbike/pocket bike.
RED/GOLDEN/BLUE/YELLOW
Please select a color.
Honda Clone/Stationary GX200 GX160 Muffler
Description:
Muffler on your Honda/Clone gx160/200 5.5hp/6.5hp
Item includes:
1xMuffler kit
Brand New Plastic Fairing Kit Set 50/70/90/110/125cc PIT PRO PIT Bike Trail Bike Dirt Bike Thumpstar Red/white
Features:
Brand New High Quality 24mm carby.
Cable choke Carburetor
Item number: GY24
Size:
Intake Diameter:24mm
Fitment:
Fit GY6 150cc auto motor/most chinese Buggy/quad Kinroad,Sahara,Kandi,Twister,Fuxin.
100% High quality aftermarket Complete Gasket Set for 250cc 4-stroke water-cooled CF/CH 250 172mm engine, CFmoto , Honda, Boreem (BMS), Kazuma, JMstar , other 250cc 172mm 4-stroke.
Fit most 250cc water-cooled buggies ,Kinroad Sahara,Kandi. Twister/Hammer.
Brand New 12V ignition coil lead with spark plug and CDI will Fit most chinese 4 stroke bike/quad/atv/buggy/trike. Coil lead length is 400mm approx. CDI: 5 PIN
Package includes:
1 x ignition coil.
1 x CDI box.
1 x spark plug.
Brand New starter solenoid Relay with fuse Fits 250cc PIT PRO Bike Trail Bike Dirt Bike Quad ATV Dune Buggy NEW solenoid to fit 200cc/250cc/300cc Dune Buggy(Kinroad, Sahara, Kandi,Fuxin, Twister).
Brand New starter solenoid Relay with fuse +CDI unit + Regulator
Fits 250cc PIT PRO Bike Trail Bike Dirt Bike Quad ATV Dune Buggy 200cc/250cc/300cc Dune Buggy(Kinroad, Sahara, Kandi, Fuxin, Twister).
This wire loom harness will fit most chinese bike with kick start in 50/70/90/110/125/140/150cc
This kill switch will fit most chinese bike/quad/atv/buggy/scooter/drift trike/huffy slider/go kart.
This switch assembly will fit most chinese bike/quad/atv/buggy/scooter/drift trike/huffy slider/go kart. It comes with start button/ light switch/kill switch.
It fits 7/8" handlebar.